How to Program Your Chevy Key Fob

If you just purchased a new Chevrolet vehicle and you are unsure how to program a Chevy key fob, we can help! Many Milton drivers who have transitioned from an older vehicle that used a traditional key are unsure how to get the most out of their new Chevy key fob at first. The service team here at Sandy Sansing is here to help though! View step-by-step instructions on how you can program a Chevy key fob below, and reach out to our team if you have any questions along the way!

Program You Chevy Key Fob: Step-by-Step Guide

Be sure to grab the Chevy remote start key fob you would like to program, then follow these simple steps:

  1. Manually unlock your car door with your Chevy key and slide behind the wheel.
  2. Double check that all car doors are fully shut, then insert the key into the ignition, but do not start the car.
  3. Press and hold the unlock button on the driver’s side door, then turn your key to the “On” position. The interior lights and radio should come on, but the engine should not be ignited.
  4. Turn the key back to the “Off” position, then turn it to “On” and right back to “Off” once again in quick succession. (On – Off – On – Off)
  5. Release the unlock button.
  6. After releasing the unlock button, you should hear the door locks engage and disengage, telling you the programming sequence can begin.
  7. On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, this indicates that you have successfully programmed your key fob.
  8. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.

No matter what Chevy model you have, or Chevy key fob, you can follow these simple steps to program it. Please be sure to reach out to our service department team if you have any questions throughout this process!

Where Can I Get a Chevy Key Fob Replacement?

If you ever lose your Chevy key fob, Sandy Sansing can help. The best way to get a Chevy key fob replacement is at a certified Chevrolet dealership, where you can be sure you’re getting a genuine Chevy key fob that will work with your vehicle just as seamlessly as your old key fob did.

Are you in need of a new Chevy key fob battery? We can help with that too! You can reach out to our parts department to start the process of replacing your key fob battery today where our friendly Chevy parts specialists will ensure you get everything you need to get back on the road as quickly as possible in Ferry Pass.

Get Additional Chevy Key Fob Programming and Vehicle Help at Sandy Sansing

No matter if you need help getting acquainted with your Chevy key fob or you need a reliable source for your Chevy key fob replacement, you can count on the service team at Sandy Sansing. You can find us near Cantonment or contact us online today to get started! We are always happy to provide you with additional information as well, including what tire rotation service looks like and more!

Saved Vehicles


You don't have any saved vehicles!

Look for this link on your favorites:


Once you've saved some vehicles, you can view them here at any time.

Contact Us

6200 Pensacola Blvd. • Pensacola, FL 32503

Get Directions

Today's Hours:

Open Today! Sales: 8am-7pm

Sandy Sansing , .